Rotary Three-axis Five Station Drilling Composite Machine

Main technical parameters

The structure and performance of the machine tool

The rotary three-axis five-station drilling and tapping compound machine is welded with steel parts and treated with artificial aging. It has good precision and stability. The whole machine is a combined structure, equipped with a PLC system, and has strong mobility.

1 drilling and tapping power head, drilling capacity: 16mm for steel parts, 20mm for aluminum parts, drilling stroke 100 specifications, feed mode: servo feed, one main motor: 3KW, the power head and the part processing hole can be manually adjusted up and down, before adjustment, loosen the two bolts on the upper and lower surfaces of the slide, rotate the handwheel to raise and lower the power head, and tighten the two bolts after the power head is positioned to prevent the power head from sliding off by itself; 2 drilling power heads: drilling capacity: 13mm for steel parts, 16mm for aluminum parts, drilling stroke 80 specifications, feed mode: servo feed, one main motor: 2.3KW, drilling and tapping power heads (JT16) are vertically installed, and the center height of the parts can be manually adjusted up and down. Equipped with a five-station automatic split turntable to achieve the positioning of five stations, and each tool can be adjusted forward, backward, left and right. Easy to load and unload. Each spindle has independent control and manual adjustment functions. The spindle bearings are all Harbin bearings; intermittent automatic lubrication system oiler, drilling power head and tapping power head have fast forward, slow forward, working forward and fast backward functions.

Process flow: start the machine → manually load the material to the loading position → turn the turntable to the first station → three stations process drilling and tapping at the same time → manual unloading → enter the second cycle.